1. You are evaluating your server for Backup Exec 9.0 installation. Because of budget constraints you need to use the same server that is already running Microsoft SQL Server 2000 for your environment. You know that Backup Exec 9.0 permits you to use the existing Microsoft SQL Server 2000 instance.
What is the minimum criteria that the SQL server must meet in order for Backup Exec to function properly with it?
A. Microsoft SP6a installed
B. Microsoft DSN connectivity
C. Microsoft SQL Server 2000 SP2
D. Microsoft SQL Server 2000 administrator permissions
|
2. After installing a Backup Exec media server license, which two remote computers can still be backed up without buying a Backup Exec Agent or Option? (Choose two.)
A. Remote UNIX systems
B. Remote NetWare servers
C. Remote Windows servers
D. Remote Windows workstations
|
3. You have a Windows 2000 server that is a member server in a Windows 2000 Active Directory domain. You are creating a logon account specifically to back up this server.
Which two group memberships given to the logon account independently allow you to fully protect the server? (Choose two.)
A. Power Users
B. Built-in System
C. Domain Admins
D. Local Administrators
|
4. You have different versions of Backup Exec installed throughout your company. You plan to upgrade all Backup Exec versions to Backup Exec 9.0 for Windows Servers.
Which three previous versions of Backup Exec can be upgraded directly to Backup Exec 9.0? (Choose three.)
A. Backup Exec for Windows NT 7.3
B. Backup Exec for Windows NT 7.01
C. Backup Exec for Windows NT/2000 8.0
D. Backup Exec for Windows NT and Windows 2000 8.6
E. Backup Exec for Windows NT and Windows 2000 8.5
|
5. If a tape device should go off-line, which Backup Exec service may need to be restarted?
A. Backup Exec Server
B. MSSQL$BKUPEXEC
C. Backup Exec Job Engine
D. Backup Exec Device and Media Service
|
6. During the installation of Backup Exec on the media server the error, "The wizard was interrupted" is returned.
Where can you find a more detailed error message to assist in the troubleshooting process?
A. VINSTALL.LOG
B. BKUPINST.LOG
C. BESERNUM.TXT
D. BEPUSHES.LOG
|
7. Which two are valid methods to verify that device drivers are installed? (Choose two.)
A. run and view the Backup Set Details by Resource report
B. run the Device Configuration Wizard to view the list of detected hardware
C. check the Devices view in the Backup Exec Administration Console to verify that your storage devices are listed
D. check the Media view in the Backup Exec Administration Console to verify that devices have been detected by Backup Exec
|
8. Which two are characteristics of drive pools with multiple devices? (Choose two.)
A. failover
B. concurrency
C. device sharing
D. multi-streaming
|
9. You have purchased a new tape device and no device drivers are available in Windows 2000. Where can you get the supported driver for this device?
A. http://www.microsoft.com
B. http://www.tapedrivers.com
C. http://cnet.shareware.com
D. http://www.dlttape.sys/drivers
E. http://support.veritas.com
|
10. Which two settings govern media-selection behavior? (Choose two.)
A. Bar Code Rules
B. Media Overwrite Options
C. Tape Device Configuration
D. Overwrite Protection Level
|
11. Due to budget constraints, you must group multiple days' differential backups on a single set of tapes. This means that Saturday's, Sunday's, Monday's, Tuesday's, Wednesday's and Thursday's differential backups for all servers will appear on the tape(s) allocated by Saturday's differential backup.
In order to preserve the data for 28 days, and recycle the tape(s) on the 29th day of the cycle, the Daily Differential media set must have which value for Append and Overwrite periods?
A. APPEND = 6 days, OVERWRITE = 21 days
B. APPEND = 26 days, OVERWRITE = 1 day
C. APPEND = 26 days, OVERWRITE = 6 days
D. APPEND = 1 day, OVERWRITE = 26 days
|
12. You want to protect allocated and imported media from being automatically overwritten. Which two Overwrite Protection Levels are valid options? (Choose two.)
A. Full
B. Total
C. None
D. Partial - Prompt before overwriting imported media
|
13. When is it appropriate to rename a tape rather than label it?
A. when the new tape name is going to contain non-alphanumeric characters
B. when the new tape name is only going to contain alphanumeric characters
C. when you want the change to be immediate and are not concerned about retaining existing data on the tape
D. when it is necessary to retain the data on the tape for now and wait for the next overwrite operation to have the tape label physically changed
|
14. You are creating new logon accounts in Backup Exec. What is the default setting for the new account?
A. default
B. system
C. common
D. restricted
|
15. You have two domains: domain Pluto and domain Neptune. Currently there is no trust relationship between the two domains. Backup Exec is installed on a server in the Pluto domain and uses the account Pluto\backup to back up the resources in that domain. The backup administrator wants to back up servers in the Neptune domain.
What do you do to accomplish this?
A. You use another existing account in the Pluto domain.
B. You create a Backup Exec logon account with administrative rights in the Neptune domain.
C. You do nothing. The current account being used to back up the Pluto domain will also back up the Neptune domain.
D. You create a new account in the domain Backup Exec is in and add a matching account in the logon accounts dialog box.
|
16. The morning after a full backup was scheduled on your standalone tape device, you receive the alert, "Please insert overwritable media." You have another tape cartridge that you want to use to continue the backup job.
What should you do?
A. You insert the tape cartridge. The job will continue automatically.
B. You insert the tape cartridge and respond "Cancel" to the alert so that it will stop requesting media.
C. You insert the tape cartridge and respond "OK" to the alert to indicate that the new media is available.
D. No action is required. The job is complete and new media will not be required until the next backup job is scheduled.
E. You respond "Cancel" to the alert, insert the tape cartridge, then run an Inventory job so that Backup Exec is aware of the new media.
|
17. Your department has recently been issued company pagers, and you would like to use Backup Exec's pager notification functionality.
Which hardware device is required to use pager notification with Backup Exec?
A. locally installed modem
B. locally installed IrDA port
C. locally installed multi-port board
D. locally installed sound card and speakers
|
18. You have a four-drive, 100-slot autoloader that Backup Exec reports has five regular backup jobs in a Queued status and four jobs in a Running status. All of these jobs were created using the default options in Backup Exec. You have been notified by a manager that critical data has been corrupted on a remote server and must be immediately restored from the Backup Exec server. You do not want to cancel any backup jobs when you facilitate this request.
Which procedure will enable the restore job to run the soonest?
A. create a restore job and redirect the necessary data directly to the Backup Exec server
B. create a restore job in Backup Exec; restore jobs always take precedence over backup jobs in Backup Exec
C. create a restore job in Backup Exec, mark its priority as Highest and it will run as soon as a tape device becomes available
D. use the Intelligent Disaster Recovery Option to recover the target server; all jobs submitted by the Intelligent Disaster Recovery Option take precedence over scheduled backup jobs
|
19. Which three file types are supported by Backup Exec pre- and post-job commands? (Choose three.)
A. BAT
B. EXE
C. BKF
D. PRE
E. POS
F. CMD
|
20. You have been doing backups of your servers for the last year. Recently you were able to purchase a robotic DLT library that replaces two 8mm drives.
What should you do to improve the manageability of your stored media?
A. store the 8mm drives off-site
B. run a Copy job of the critical servers
C. duplicate the old backups to the new media
D. attach the 8mm drives to a standalone server
|
21. There are four different requests for various user data to be restored onto the file server. One of the four is from the CEO of your company and is critical to a meeting the CEO is attending later today.
Which procedure allows for this to be accomplished with the lowest administrative overhead?
A. create all four restore jobs and submit all jobs as On Hold, except for the CEO restore job
B. create the CEO restore job first and wait for it to finish before proceeding to create the other restore jobs
C. create the CEO restore job first and then create the other three jobs and choose the CEO restore job in the dependency field
D. create the four jobs to begin in five minutes and modify the Job Priority so that the restore for the CEO has the highest priority
|
22. Consider the following backup strategy:
* Full backups are run every Friday night.
* Differential backups are run Monday through Thursday nights.
The main file server has a hard drive failure Wednesday afternoon.
Which statement describes the action that you should perform to restore all available data as rapidly as possible?
A. restore the differential backup from Tuesday night
B. restore the differential backup from Wednesday night
C. restore the full backup from the previous Friday and then restore the differential from Tuesday night
D. restore the full backup from the previous Friday and then restore the differentials from Monday and Tuesday nights
|
23. From which of the following is a job constructed? (Choose two.)
A. a backup job name
B. a backup job policy
C. a backup job template
D. a backup selection list
|
24. You have a 100-slot Robotic Library. You need to send specific tapes offsite. Which report lists which tapes were in which Robotic Library slot?
A. Media Report
B. Device Status Report
C. Device Summary Report
D. Robotic Library Inventory Report
|
25. The administrator account was locked out and the password had to be reset. Jobs have begun failing with an access denied error message.
You are only backing up the local server. What should you do to resolve the issue?
A. You must unlock and use the original administrator account.
B. You create a restricted and an unrestricted logon account; assign a valid administrator login to these accounts.
C. On the media server, you modify the Backup Exec services and change the service account to a valid administrator account.
D. You update the logon account that contains the former administrator's credentials, replacing them with a valid administrator account.
|
26. Which three of the following can be used to determine if Backup Exec is the latest version? (Choose three.)
A. VMon.log
B. Bediag.txt
C. SGMon.log
D. Bkupinst.log
E. VERITAS Update
|
27. After rebooting the backup server, you notice the Backup Exec services were not started. You manually started all the Backup Exec services and the program seems to function properly.
What could be the reason for the services not starting on bootup?
A. All Backup Exec services were set to Manual startup type.
B. Internet Information Server is installed on the backup server.
C. All Backup Exec services were set to Automatic startup type.
D. In Backup Exec Services under the Tools menu, the Backup Exec services were set to Only Startup when Backup Exec is Opened.
|
28. During backups, you constantly get Tape Alerts stating that the device needs to be cleaned. You clean the drive every day.
Which three options are valid troubleshooting steps? (Choose three.)
A. Replace the drive
B. Replace the SCSI card
C. Replace the SCSI cable
D. Try a new cleaning tape
E. Recreate the backup job
F. Upgrade the firmware of the tape drive as per the manufacturer's recommendations
|
29. Which three statements are true about selecting data to restore? (Choose three.)
A. You can make restore selections using the Restore Job Wizard.
B. You can make restore selections using the Restore Job Properties window.
C. Restore selections are based on default selections set through the Tools > Options menu.
D. You can make restore selections by performing a catalog search through the Edit > Search Catalog menu.
|
30. The backup failed last night. The following is an entry from the job log:
Final Error Code: a0008488 HEX
Final Error Description: "Access is denied"
Final Error Category: Security Errors
Error Text in Job Log:
Backup
- "Access denied to directory %directory% Directory %directory% was not found, or could not be accessed. None of the files or subdirectories contained within will be backed up."
Restore
- "Access denied to directory %directory. Error writing security data stream" - "Access denied to file %directory%\%file. Error writing security data stream"
What is the reason the job failed?
A. The data stream being used is being transferred over IPX/SPX as opposed to TCP/IP.
B. The Backup Exec services are using the Domain Administrator account instead of the Backup Exec service account.
C. The backup files and directories inside Local Security Policy have not been granted to the Backup Exec service account.
D. The user account specified in Backup Exec to back up/restore the resource does not have sufficient rights.
|